cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
325
Views
0
Helpful
0
Replies
JordanReich53042
Beginner

RV340 SSL VPN - Fails to Communicate after Initial Attempt

I self-resolved this problem. Thank you.

I am having issues getting the SSL VPN service on RV340 to work correctly with mobile phone devices. I have not attempted to establish a connection through a Desktop Client at this point in time. 


Information:
- RV340 Dual WAN Gigabit VPN Router

- Version: 1.0.03.15
- Signature Version: 2.0.0.0006

Connection Setup:
- Perimeter router is a MikroTik RouterBOARD 3011UiAS

- RV340 is set in Bridge Mode to 10.0.0.38 (subnet range of primary devices on MikroTik)
- RV340 DNS is set to 10.0.0.3 internal DNS service through Windows
- SSL VPN is set to 10.1.0.0 with a subnet range of 255.255.255.192
- Internal firewall is set to ALLOW-ALL in and out of RV340
- SSL VPN is set to 8443 TCP
- MikroTik allows 8443 incoming and DST-NAT to 10.0.0.38 - 8443 TCP
- Connection bridge is set on WAN1 on RV340
- RV340 has custom certificates imported issued by Sectigo RSA Domain Validation (not-self signed)
- The mobile device has the same PFX certificate imported for VPN connections
- RV340 custom certificate has been applied to NETCONF, WebServer, RESTCONF, and SSLVPN

On a rare occasion, I appear to be able to establish a connection with the system. Although I do not have internet connectivity my guess is that might be related to a static route. I will play with those next.


However, more often I get the following error returned when attempting to connect:
"Connection attempt has timed out. Please verify Internet connectivity."

Any assistance that you may be able to provide in getting this service set up correctly would be much appreciated!

Thank you

0 REPLIES 0
Content for Community-Ad