cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
778
Views
0
Helpful
2
Replies
Highlighted
Beginner

Set VPN Client IP via ACS (RADIUS)

We are using ACS 5.1 and ASA 8.3.2 with both Anyconnect and IPSec client.  I would like to be able to set the Users IP from either the ACS local database or via Active Directory if possible.  This applies to specific users like consultants that we need to restrict or for users with special access to other systems where using a pool is too broad.  Is there any documentation available or has anyone actually gotten this to work?  I can't find anything dealing with this.

Any help is appreciated.

Brett

2 REPLIES 2
Highlighted
Rising star

Re: Set VPN Client IP via ACS (RADIUS)

There is an option under the user/group which can set the ip assigned to either static from acs, a pool on the VPN box, or assigned by the user.

Highlighted
Rising star

Re: Set VPN Client IP via ACS (RADIUS)

Sorry, i was thinking acs 4.x :-(

This thread seems to answer it : https://supportforums.cisco.com/thread/2014343?tstart=0#3059794

Jan