Setup VPN when remote PEER is dynamic

[jefchris]

How do I setup VPN when one of the peers has a dynamic address?

[mostiguy]

Set up the static pix with wildcard settings, similar to how you configure a static pix to terminate remote access vpn connections. Cisco should have a demo config posted in the PIX section

[jackko]

the feature is called ezvpn, which is supported on router, pix, and concentrator.

for router,

http://www.cisco.com/en/US/products/ps5854/prod_configuration_guide09186a00802c3270.html

for pix,

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a008019e6d7.shtml

[jackko]

just wondering how you go.