cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
214
Views
0
Helpful
1
Replies
Mohamed Lotfy
Beginner

Site-2-Site VPN Between HQ , Site A & Site B

Dear Brothers,

Really i need your kindly help about the Site-2-Site VPN.

We have an HQ and 2 Sites (Site A & Site B) , and we are thinking to configure Site-2-Site VPN between them now.

HQ --> Router 3845 (Will be the Hub) --> Has Data vlan 11 & Voice vlan 21

Site A --> Router 2901 (Will be the Spoke1) --> Has Data vlan 12 & Voice vlan 22

Site B --> Router 1941 (Will be the Spoke2) --> Has Data vlan 13 & Voice vlan 23

So my questions are:

1- When the VPN is going UP, are the HQ Data & Voice vlans will be able to reach to the Site A & Site B Data & Voice vlans and Vice versa ?

2- When the VPN is going UP, are the Site A Data & Voice vlans will be able to reach to the Site B Data & Voice vlans and Vice versa ?

Thanks

 

1 ACCEPTED SOLUTION

Accepted Solutions
Abaji Rawool
Participant

Hi,

I think this example explains what you need:http://www.cisco.com/c/en/us/support/docs/security-vpn/ipsec-negotiation-ike-protocols/7912-ios-hub-spoke2.html

 

Regards,

Abaji.

 

 

View solution in original post

1 REPLY 1
Abaji Rawool
Participant

Hi,

I think this example explains what you need:http://www.cisco.com/c/en/us/support/docs/security-vpn/ipsec-negotiation-ike-protocols/7912-ios-hub-spoke2.html

 

Regards,

Abaji.

 

 

Create
Recognize Your Peers
Content for Community-Ad