cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Site-to-site RV110W dynamic to ASA 5505 Static

blorp
Beginner
Beginner

Scenario: I'd like to connect my RV110W back to my ASA 5505 via IPSEC VPN. I have an Arris modem/router through my Internet provider, which I've connected the RV110W to. The ASA 5505 is static, and my Internet on the RV is dynamic. I assume this would be an aggressive-mode tunnel, since I can't plug in the remote IP into the ASA, as it is dynamic.

Thoughts? I've searched Google extensively with little luck.

Any info would be sincerely appreciated.

Thanks

1 REPLY 1

Mohammad Alhyari
Cisco Employee
Cisco Employee

No need for the aggressive mode. Since the ASA has the static address it can be configured like this:

 

https://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/119007-config-asa9x-ike-ipsec-00.html

 

Moh,

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: