08-13-2013 02:47 PM
Hi all,
I'm new to VPNs so bare with me...
We have 2 sites, 1 in the Philipines (5505) and one in New Zealand (5515) which are connected via VPN. This works fine. We also have a VPN from the 5515 to Microsoft Azure.
What we need to do is allow connections from the 5505 to Azure via the 5515. I have tried configuring it but can't seem to get it to work. When I run the packet tracer I can see that there is no VPN lookup happening for networks in Azure (from the 5505) but when I try a NZ network I can see VPN lookups happening.
Here's a basic diagram of what things look like.
Is what I'm trying to do even possible? To keep things simple lets ping from 172.29.1.1 to 172.16.0.1 and assume there are not ACL blocking traffic.
Solved! Go to Solution.
08-13-2013 08:25 PM
Hello Farnell,
This is possible, no problem at all
What you will need to do:
Afterwards my friend, you should be up and running!
Check my blog at http:laguiadelnetworking.com for further information.
Cheers,
Julio Carvajal Segura
08-13-2013 08:25 PM
Hello Farnell,
This is possible, no problem at all
What you will need to do:
Afterwards my friend, you should be up and running!
Check my blog at http:laguiadelnetworking.com for further information.
Cheers,
Julio Carvajal Segura
08-14-2013 03:05 PM
Hi Julio,
Thanks a lot for that. Everything is working now.
It turned out that the Azure network was not a member of the NAT group that the other networks are. I added it into that and it worked.
Turns out we're running a multitude of versions here so your answer reflects version pre 8.3 but it was still helpful
08-14-2013 09:02 PM
Hello A.farnell,
Glad to hear that I could help,
Check my blog at http:laguiadelnetworking.com for further information.
Cheers,
Julio Carvajal Segura
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: