01-18-2018 05:51 AM - edited 03-12-2019 04:55 AM
Hi
We have a site to site VPN with a 3rd party who are planning to change their public IP.
I want to set our end of the tunnel with their new IP beforehand so when they change their IP, the tunnel to their new IP comes up.
Could I do this by doing the following:
1) Add the new IP as a secondary IP on the existing crypto map
2) Copy the existing tunnel group with the new IP and PSK
Also can this be done in hours, will these changes drop the current VPN?
Thanks
Solved! Go to Solution.
01-18-2018 06:09 AM - edited 01-18-2018 06:10 AM
1) Yes you can add a secondary IP to the crypto-map
2) Yes you need to set up a tunnel-group for the new IP, in order to do this you will have to get the pre-shared key. Pre-shared key can be viewed using:
more system:running-config
The tunnel will drop when adding the secondary IP, but will be immediately renegotiate.
HTH
Bogdan
01-18-2018 06:09 AM - edited 01-18-2018 06:10 AM
1) Yes you can add a secondary IP to the crypto-map
2) Yes you need to set up a tunnel-group for the new IP, in order to do this you will have to get the pre-shared key. Pre-shared key can be viewed using:
more system:running-config
The tunnel will drop when adding the secondary IP, but will be immediately renegotiate.
HTH
Bogdan
01-18-2018 07:07 AM
Thankyou Bogdan for the info
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: