I am try to use site to site VPN through VPN concentrator 3030 at both side. Site A has a lan Ip address 192.168.1.x/24 and my side IP address is 172.16.1.x/24. Now when source packet from 192.168.1.x subnet come to my VPN, I want to NAT it to 192.168.100.x before transfering to my LAN.IS it possible to do destination NAT at my site.
Not at your site, or at least not with the VPN concentrator (you could NAT the traffic with any internal router on your site though). If you want the VPN3000's to do the whole thing then you have to NAT it at the SiteA concentrator, this way when it gets to your site it'll already be 192.168.100.x, which is really no different than the SiteB concentrator NAT'ing it after it arrives.
Meet the Authors Event - CCIE Security in a Remote and Cloud Driven Network: SASE and Beyond
(Live event – Thursday, 29th, 2021 at 10:00 a.m. Pacific / 1:00 p.m. Eastern / 7:00 p.m. Paris)
This event will have place on Thursday 29th, April 2021 at 10...
Application Protection, Availability & Security
Join our webinar May 6th to gain valuable industry insights into the most recent application cyber attacks and to understand the potential impact bot traffic is having on your business.
The purpose of this document is to demonstrate how ISE authenticate / authorize a user that uses a smart card (PIN + Certificate) and password mechanism to login their system. This document describes the components used for this setup, configuration of IS...
For all versions of the Email Security Appliance (ESA) and Security Management Appliance (SMA), some Secure Sockets Link (SSL) certificates issued from the QuoVadis root certificate authority (CA) trust chain before 2021-03-31 cannot b...