site-to-site VPN nightmare!

[neilwheatcroft]

Hi,

I'm very new to cisco equipment and was hoping someone could help me with this issue I have. I am trying to set up a VPN from a cisco 837 router that I have to another company, which I think is using a PIX. After some tweaking I managed to set the same VPN up from another site we have, which uses a 3000 concentator. However after using cisco SDM and using as many commands as I know how I cannot get the VPN tunnel to come up. Essentailly I want <server1> and <server2> (as shown in the attached show run) to be able to access 192.168.0.100 that is off of my 837 router. Any help would be very gratefully received.

[jmia]

Neil,

Take a look here:

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a0080094498.shtml

Hope this helps.

[john.king]

Are you aware that all the encrypted passwords you have posted in your file can easily be decrypted? Change your passwords on your equipment.

[Vikas Saxena]

Hello,

Please provide the debugs.

Please change your passwords asap.

The router passwords can easily be decrypted. It is a old vinegere ciphere they use in Routers.

Vikas