05-20-2020 05:55 AM
hi i'm new to networking, i wonder is it possible to create a site to site vpn between site A and site B both cisco 2911 router and connected to internet by dialer interface (adsl)
Solved! Go to Solution.
05-20-2020 06:48 AM
Hi,
You should look to use FlexVPN static Virtual Tunnel Interface (VTI) on the cisco routers. You can specify the tunnel source as the dialer interface. Here is the cisco guide, have a look and ask further questions if required.
HTH
05-20-2020 06:48 AM
Hi,
You should look to use FlexVPN static Virtual Tunnel Interface (VTI) on the cisco routers. You can specify the tunnel source as the dialer interface. Here is the cisco guide, have a look and ask further questions if required.
HTH
05-20-2020 11:16 AM
both routers public ip address are dynamic. is it possible to use dns on tunnel destination instead of ip.
thanks for your response
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide