cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
730
Views
0
Helpful
2
Replies

Snmp monitoring via IPSEC Tunnel

Capricorn
Level 1
Level 1

Hi!

We have IPSec tunnel between two sites and I want to monitor the Site B ASA Interface and I have configured the snmp on cisco Asa. The issue is that I dont have any management interface and I tried snmp on both inside and outside for testing but I can see the request coming to Cisco Asa on port 161 "Build inobut UDP connection" for Otuside ...

All the interested traffic is allowed between two sites.

 

Monitoring server--- Site A IPSEC ------------------------ Site B IPsec Oustside Cisco Asa interface to be monitored.

I am using Inside interface to snmp pull. Inside interface contains the IPaddress 192.168.1.25.

Any help with this?

 

Thanks

 

 

 

 

2 Replies 2

Seb Rupik
VIP Alumni
VIP Alumni

Hi there,

Have you specified the snmp server on the ASA:

!
snmp-server host OUTSIDE 192.168.1.25 community <community_string>
!

cheers,

Seb.

 

192.168.1.25 is Cisco ASA inside IP

I have this command 

 

snmp-server host outside 10.120.1.2 community xxxx

10.120.1.2 is my monitoring server which is located on site A

 

I even tried from my machine with IP 10.120.1.40 and run the visual snmp but getting Request Time out

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: