03-17-2013 08:02 PM
Hello All,
Is it possible with ASAVPNSERVER 5520 and an EasyVPN 5505 Client to have the client do split tunnel to a single public IP address? Both devices are on 8.2(5) 33. Could you possible provide sample config for split tunnel?
Thank you,
Raun
03-17-2013 08:39 PM
Hi Raun,
Please check this out:
PIX/ASA 7.x Easy VPN with an ASA 5500 as the Server and PIX 506E as the Client (NEM) Configuration Example
So what you are looking for is:
On the server:
group-policy myGROUP internal group-policy myGROUP attributes split-tunnel-policy tunnelspecified split-tunnel-network-list value ezvpn1
Once the client connects will access whatever you defined in the ACL named ezvpn1.
HTH.
Portu.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Log in to Community