cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2490
Views
0
Helpful
2
Replies

Terminal Server using NM-16A

Ashraf Khan
Beginner
Beginner

Hello,

I was trying to set terminal server using NM-16A module in Cisco 2651XM router but no luck. I did use 2511 in the past without any issue but i don't know if i'm not doing anything wrong with this module as i never set terminal server with this module before. Initially i thought my NM-16A is bad but when i do "sh ver" then router shows 16 Terminal Lines. All i get connection refused by remote host when i try to console other device even after clearing lines. Can anyone please help?

Thanks,

1 Accepted Solution

Accepted Solutions

William Bell
Advisor
Advisor

You may want to take a look at this doc:

http://www.cisco.com/en/US/docs/ios/interface/configuration/guide/ir_nm16as.html

It has been a while since I have used the async interfaces on a 25xx series device.  I have used the async mod on a 2600 and aside from setting baud rate, parity, etc. I don't recall any special issues.  I have one in my lab now, but apparently I have misplaced my async octopus cables.  Which is a bit disconcerting.

Anyway, hope that helps.

Regards,

Bill

Please remember to rate helpful posts.

HTH -Bill (b) http://ucguerrilla.com (t) @ucguerrilla

Please remember to rate helpful responses and identify

View solution in original post

2 Replies 2

William Bell
Advisor
Advisor

You may want to take a look at this doc:

http://www.cisco.com/en/US/docs/ios/interface/configuration/guide/ir_nm16as.html

It has been a while since I have used the async interfaces on a 25xx series device.  I have used the async mod on a 2600 and aside from setting baud rate, parity, etc. I don't recall any special issues.  I have one in my lab now, but apparently I have misplaced my async octopus cables.  Which is a bit disconcerting.

Anyway, hope that helps.

Regards,

Bill

Please remember to rate helpful posts.

HTH -Bill (b) http://ucguerrilla.com (t) @ucguerrilla

Please remember to rate helpful responses and identify

Thank you Bill that link was helpful and it is now working.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers