cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
478
Views
0
Helpful
1
Replies
ronald.tuns
Beginner

Traffic from Easy VPN Client to remote end of site-to-site

Hi everyone,

I was wondering if someone could help me out on the following setup:

A user with Easy VPN client connects to a 876 ISR (router A). This router also has a site-to-site VPN to another 876 ISR (router B). What I want to achieve is that the user dials in to router A and can access the network on the remote end of the site-to-site tunnel (router B)

In diagram:

user (192.168.18.x) - Easy VPN - Router A (192.168.16.x) - sitetosite - Router B (192.168.17.x)

I have added routes in router B to the 192.168.18.x network with router A as next hop, but I can't reach the other segment.

Any help is greatly appreciated!

Ronald Tuns

1 REPLY 1
mvsheik123
Rising star

Hi,

Make sure the below is configured properly..

1. Easy VPN client connects gets the 192.168.17.x subnet downloaded to his tunnel policy when connected.

2. On Router B- Traffic from 192.168.17.x --> 192.168.18.x is not natted (no nat list)

3. On Router A 192.168.18.x -->   192.168.17.x is not natted.

This is inaddition to proper routes on Routers.

hth

MS

Create
Recognize Your Peers
Content for Community-Ad