cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
682
Views
0
Helpful
2
Replies

traverse between multiple diffreent site-to-site IPSec VPN

yong khang NG
Level 5
Level 5

Hi All

 

As title describe, i would like ask is it possible traffic passthry multiple IPSec seti-to-site VPN tunnel, where as control the traffic using routing.

 

Attached the network topology as refernce.

 

Or is there any other workaround to achieve the goal fro site A to reach site C?

 

Thanks

 

Noel YK

1 Accepted Solution

Accepted Solutions

Yes it is possible as long as the traffic is included in the interesting
traffic through routing or ACL. Typical example is spoke-hub-spoke
communication in phase-2 dmvpn.

*** remember to rate useful posts.

View solution in original post

2 Replies 2

Hi,

Yes you can achieve this using FlexVPN static VTI's, you can either use static routes or use a dynamic routing protocol would make it easier. The next hop address for each network would be the tunnel interface of the peer router, not the public IP address.

 

Reference guide here.

 

HTH

Yes it is possible as long as the traffic is included in the interesting
traffic through routing or ACL. Typical example is spoke-hub-spoke
communication in phase-2 dmvpn.

*** remember to rate useful posts.
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: