trouble with cisco client vpn

[bbasri]

Hi all ,

we have pix 515 configured like endpoint vpn , with 34 cilent vpn.

Today ,all the client VPN disconnected to my pix after few minites when they are connected . the

have the same message " your VPN connection has been terminated " . The internet connection is still active .

i don't touch anyting in the configuration of the pix or in the client vpn .

Can we help us ???

Best Regard

[sachinraja]

Hii bbasri,

if all the clients are disconnected, the problem is only at ur end.. either the pix or the internet router or the switch.. nothing to be checked on the vpn client at remote ends..

it has happened with me sometimes, and most often, the internet link fluctuates, due to which the outside IP of the pix becomes unreachable.. you can also check if the outside interface of the pix has gone up/down.. if the router is connected through a switch, you can check the switch port too.

if u have a syslog server, u can check these at right times, to find out the root cause of the problem...

hope this helps.. all the best.. rate replies if found useful...

Raj

[bbasri]

my pix is always reachable , i found source of the problem , i 'am trying to build another tunnel vpn with cheekpoint NG , so the clients vpn are confuse between 2 transform set .

[sachinraja]

cool mr.basri.. can you mark the case as solved one , which might be helpful to others ?

Raj