TTY ports mapped to line numbers

[dedas]

Do you have anything that would detail how the line numbers map to tty ports in a 2811 and 1841 router? I know the slots and layout on the chassis, but I can't seem to find how they map to line number 1-96.

[renoufi]

Router# show line

Tty Line Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns Int

* 0 0 CTY - - - - - 0 0 0/0 -

1 1 AUX 9600/9600 - - - - - 0 0 0/0 -

0/3/0 50 TTY 9600/9600 - - - - - 0 0 0/0 Se0/3/0

0/3/1 51 TTY 9600/9600 - - - - - 0 1 0/0 Se0/3/1

1/0 66 TTY 9600/9600 - - - - - 0 0 0/0 -

1/1 67 TTY 9600/9600 - - - - - 0 0 0/0 -

1/29 95 TTY 9600/9600 - - - - - 0 0 0/0 -

1/30 96 TTY 9600/9600 - - - - - 0 0 0/0 -

1/31 97 TTY 9600/9600 - - - - - 0 0 0/0 -

322 322 VTY - - - - - 0 0 0/0 -

323 323 VTY - - - - - 0 0 0/0 -

324 324 VTY - - - - - 0 0 0/0 -

325 325 VTY - - - - - 0 0 0/0 -

326 326 VTY - - - - - 0 0 0/0 -

tty 1/0 line 66 will be accessable by telnet x.x.x.x 2066

You could also use 4066 and 6066 depending on what type of connection you want

[renoufi]

Info above from here:

http://www.cisco.com/en/US/products/hw/routers/ps282/products_tech_note09186a008035b051.shtml