06-04-2015 01:44 AM
Hello
Constantly, I have an error between 2 Cisco Small Buisness RV320. Both routers have the same configuration.
VPN works fine but after two or three days VPN stop and in logs i can read "packet from xx.xx.xx.xx:500: [Tunnel Authorize Fail] no connection has been authorized with policy=PSK"
A idea ?
Thanks
05-19-2016 11:34 AM
Same issue here,
[g2gips0] #205: [Tunnel Authorize Fail] ignoring Delete SA payload: PROTO_IPSEC_ESP SA(0xc7935bb1) not found (maybe expired)
Firmware Version: v1.3.1.10 (2016-02-15, 10:00:11) - And i've noticed this version is now removed from the cisco download page.
Still no resolution, and cisco support is also stumped.
01-16-2017 10:33 AM
Hi Dear,
I deployed VPN mode Client to Gateway (Easy VPN setup), using Cisco vpn client 5.0.0.7 as client software , therefore i'm facing the same problem the vpn working unstable, for nothing stop to working force me to reebot the RV320 everytime.
Firmware Version: v1.3.1.12 (2016-04-27, 10:46:12)
Log Error:
2017-01-16, 14:01:59 VPN Log packet from 191.xx.xx.xx:62911: [Tunnel Authorize Fail] no connection has been authorized with policy=PSK+AGGRESSIVE+XAUTHPSK+XAUTHSERVER
it seems some bug, someone has some ideia how does solve it ?
Tks,
Farley Santos
06-05-2018 05:21 AM
I'm having the exact same problem with the RV320. I'm trying to connect to the office using an Iphone using the inbuilt VPN client.
With a PC I can connect to the RV320 using PPTP without issue, but no matter what I try I can't get the iPhone to connect. It is most frustrating! Did you ever find a result. I really wish to avoid re-setting my device and entering my configuration manually when I have wasted so much time already.
10-18-2019 08:48 AM
Hello! is there a solution or at least a diagnostic for this? it´s 2019 and i dont seem to find an answer
11-12-2019 08:35 AM
In case anyone else comes across this issue....
iPhone doesn't allow PPTP VPN.
cheers
07-24-2019 10:33 AM
02-03-2020 12:47 PM
Same symptom here. But it's now 2020
[Tunnel Authorize Fail] no connection has been authorized with policy=PSK+AGGRESSIVE
v1.5.1.05 (2019-10-01, 15:39:40)
08-05-2020 03:05 PM
Hi, if you solved it please let us know. I am having same issue.
08-05-2020 05:47 PM - edited 08-05-2020 05:48 PM
As I was telling you, I was having this issue:
If initiator was not setup as aggressive mode I was getting this message:
[Tunnel Authorize Fail] 'g2gips0' forbids connection, cause: Aggressive Mode
If initiator was setup as aggressive mode I got this one:
[Tunnel Authorize Fail] no connection has been authorized with policy=PSK+AGGRESSIVE
I was becoming to think there was a problem with router but not. Called Cisco Small Business Support and a guy helped me to find the error. Was a very simple error, I was using ID in the wrong space field.
For those who find this error with ipsec, remember to have both sites as mirror, I mean exactly the same configuration, that solved my problem.
My future purchases will be Cisco brand. The router I was having trouble with was purchased on 2012, and today, 2020, I got support for it directly from Cisco TAC.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: