cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
332
Views
5
Helpful
3
Replies

Upgrade VPN to v4.1.7D stops Admin logons

tjenkin2
Level 1
Level 1

Just upgraded a VPN 3030 to v.4.1.7D. The box came back OK and is working so far as the users are concerned but Admin logons can no longer access the server via a Web page. Telnet works fine but Web page refuses to display the logon page ?

Any ideas ?

Thanks.

1 Accepted Solution

Accepted Solutions

ehirsel
Level 6
Level 6

Examine the 3030 config under configuration -> system management -> management protocols to see if you still enable http management and that the port is what you expect it to be. This is assuming you use http to connect. If you use https then check here Configuration | Tunneling and Security | SSL | HTTPS and insure that htts is enabled, the port is correct (default is 443) and that the protocols under SSL are what you expect.

Let me know what you find.

View solution in original post