03-30-2016 09:55 AM
Hi All,
I am running ASA 9.3 version and i need some supporting doc to install CA & identity cert in ASA either using ASDM or CLI for configuration.
Can anyone share good doc for this.
I have existing site-to-site VPN working using IKEV1 and preshared key, now customer wants to use secure authentication using certificate and IKEV2. Is anyone having good doc to refer the configuration for installing the cert and IKEV2 config.
I already have the cert.
your quick response will be appriciated.
Thanks
AMar.
03-30-2016 10:06 AM
Here are few documents for your reference:-
Renew and Install the SSL Certificate with ASDM
http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/107956-renew-ssl.html
Site-to-Site IKEv2 Tunnel between ASA and Router
http://www.cisco.com/c/en/us/support/docs/security-vpn/ipsec-negotiation-ike-protocols/117337-config-asa-router-00.html
Regards,
Dinesh Moudgil
P.S. Please rate helpful posts.
03-30-2016 11:39 AM
Hi Dinesh,
thanks for your reply..
I was referring this doc earlier but this seems cert installation on 8.x . I am currently using 9.3 and RSA authentication for site-to-site but below doc is for SSL. Do we have same config steps for IPsec site-to-site VPN running on 9.3 ?
http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/107956-renew-ssl.html
Thanks
Amar
03-30-2016 04:58 PM
Hi Amar,
Here is a good link for creating
http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/110221-asavpnclient-ca.html
There should not be no major change in the syntax. Instead of
Hope it helps.
Regards,
Aditya
Please rate helpful posts.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: