cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
796
Views
0
Helpful
3
Replies
sachinraghav
Beginner

VPN 3000 concentrator | Event logs

Hello Everyone,

We have Cisco VPN 3000 device at our company and I need assistance regarding below query:-

As soon as I got connected to vpn device via serial console, the chain of event logs keep on coming on console window and it doesn't even allow me to log in. I could only able to login via console when i unpluged network cables from it. Any idea why is it happening and how to fix it?

Thanks,

Sachin     

3 REPLIES 3

Hi Sachin,

Once on the console (with the cable unplugged) do this:

1) Configuration

2) Administration

3) Monitoring

4) Save changes to Config file

5) Help Information

6) Exit

Standard Forwar~: Main -> 1

1) Interface Configuration

2) System Management

3) User Management

4) Policy Management

5) Tunneling and Security

6) Back

Standard Forwar~: Config -> 2

1) Servers (Authentication, Authorization, Accounting, DNS, DHCP, etc.)

2) Address Management

3) IP Routing (static routes, OSPF, etc.)

4) Management Protocols (Telnet, TFTP, FTP, etc.)

5) Event Configuration

6) General Config (system name, time, etc.)

7) Client Update

8) Load Balancing Configuration

9) Back

Standard Forwar~: System -> 5

1) General

2) FTP Backup

3) Classes

4) Trap Destinations

5) Syslog Servers

6) SMTP Servers

7) E-mail Recipients

8) Back

Standard Forwar~: Event -> 1

1) Enable/Disable Save Log on Wrap

2) Format for Saving Log

3) Enable/Disable FTP Save Log on Wrap

4) Set E-mail source address

5) Set Event Forwarding

6) Format for Syslog

7) Back

Standard Forwar~: Event -> 5

1) Which Events get Logged

2) Which Events go to the Console

3) Which Events go to the Syslog

4) Which Events go to E-mail

5) Which Events go to SNMP Trap

6) Set General Event List

7) Back

Standard Forwar~: Event -> 2

     Which Events are Sent

0      : No Events

1 - 13 : Maximum Event Severity Level (see table below)

99     : Use General Event List

     The following is a description of the Event Severity Levels

Severities  1 - 3 are Warning :   1  - Fault    2  - Warning1   3 - Warning2

Severities  4 - 6 are Info    :   4  - Info1    5  - Info2      6 - Info3

Severities  7 - 9 are Debug   :   7  - Debug1   8  - Debug2     9 - Debug3

Severities  10, 11 are Decodes:   10 - Hdecode  11 - Ldecode

Severities  12, 13 are Dumps  :   12 - HdrDump  13 - PktDump

The maximum allowable severity for this menu item is 5

> Which Events go to the Console

Standard Forwar~: Event -> [ 1 ] 1

Then connect the 3K to the network. If you try to open the console, do you see the same issue?

Thanks.

Portu.

Please rate any posts you find useful.

sachinraghav
Beginner

Hi

Thanks for your reply!!!

I tried to change the setting to "Severity 1" and "Null" for the option "Event go to console" but then even seeing logs at console however I have only saved the changes and have not rebooted the device after each change, hope rebooting is not required... Please advice further.

Thanks,

Sachin

Sachin,

It should be done, I think you may need to save the changes and reboot the 3K.

Let me know.

Portu.

Create
Recognize Your Peers
Polls
Which of these topics should we host an event in the Community?

Top Choice: pxGrid (39%)

Content for Community-Ad