VPN Between Cisco 4g Router with Dynamic private ip And cisco ASA 5520 Static Private ip
I want to achieve vpn connectivity between Cisco 4g Router C819HG and Cisco ASA 5520 with 8.2 code , as i read documentation i saw this router is supports ezvpn , I have this 4g router with dynamic Private IP and Cisco ASA with static Public IP , Can Anyone please share how can we achieve this task
I already made configuration But not tested , Please ignore IP address scheme .
aaa authentication login rtr-remote local
aaa authorization network rtr-remote local
aaa session-id common
username Cisco password 0 *****
username admin password 0 *************
userbane cgc password 0 ******************
crypto isakmp policy 1
ip local pool dynpool 192.168.2.10 192.168.2.50
crypto isakmp client configuration group rtr-remote
dns 126.96.36.199 188.8.131.52
crypto ipsec transform-set vpn1 esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 86400
crypto dynamic-map dynmap 1
set transform-set vpn1
crypto map static-map 1 ipsec-isakmp dynamic dynmap
crypto map dynmap isakmp authorization list rtr-remote
crypto map dynmap client configuration address respond
crypto ipsec client ezvpn ezvpnclient
group 2 key secret-password
peer 78.100.x.x 255.255.255.248
interface fastethernet 4
crypto ipsec client ezvpn ezvpnclient outside
crypto map static-map
interface vlan 1
crypto ipsec client ezvpn ezvpnclient inside
!Configuration (Easy VPN Server)
! Assumes local subnet = 10.223.0.0/24
! Assumes remote subnet = 192.168.2.0/24
! isakmp policies
crypto isakmp enable outside
crypto isakmp policy 10
! NAT exemptions
access-list NONAT extended permit ip 10.223.0.0 255.255.255.0 192.168.2.0 255.255.255.0
nat (inside) 0 access-list SD_NONAT
! Defines the remote subnet
access-list EZVPN_ACL remark ACL for EZ VPN Remote
access-list EZVPN_ACL extended permit ip 10.223.0.0 255.255.255.0 192.168.2.0 255.255.255.0
! Group policy defines the configuration applied to the EZ VPN Remote client
group-policy EZVPN_GP internal
group-policy EZVPN_GP attributes
split-tunnel-network-list value EZVPN_ACL
! Tunnel group is used for initial authentication and to apply group policy
tunnel-group EZVPN_TG type ipsec-ra
tunnel-group EZVPN_TG general-attributes
tunnel-group EZVPN_TG ipsec-attributes
pre-shared-key <group password here>
! EZ VPN remote user account password
username EZVPN_ACL password <user password here>
crypto dynamic-map DYNAMIC-MAP 5 set transform-set ESP-AES-128-SHA
crypto map OUTSIDE_MAP 65530 ipsec-isakmp dynamic DYNAMIC-MAP
Over the past decade, Cisco has published a wealth of security and threat intelligence information for security professionals interested in the state of global cybersecurity. The Cybersecurity Report Series provides detailed accounts of threat landsc...
You will need to make sure that you have Orbital access before we begin. You need to be an AMP for endpoints Administrator, Advantage tier licensing or higher and you'll need at least one host with Orbital installed and connected to th...
When I log into SecureX, I'm given an option to Sign in with MIcrosoft. What information is shared from my profile with Cisco?
1. If you signed in with your work email, the information shared from your profile is controlled by your or...
Stealthwatch Enterprise can be leveraged to monitor vulnerable devices, and alert on potential exploitation by bad actors looking to exploit Ripple20 and other potential vulnerabilities.
Note that the concepts and procedures outlined here can be used for...
The following is useful to those entities interested in monitoring appropriate usage of Cisco WebEx resources within their environments, as well as those interested in tracking additional metrics around usage of the WebEx service.
The relevant supporting...