cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
554
Views
0
Helpful
2
Replies

VPN Client - Conenction made but not able to access resources

drikilbride
Level 1
Level 1

Hi

I have two sites, Site A with a 5510 firewall and Site B with a user with a basic internet connection.

I need that user to be able to access PC's and servers here.

I created a Remote Access VPN called Bon and the user can establish connection to this on Site B.

They get an ip address and dns but no default gateway.

I am unable to ping anything on the 10.255.0.0/16 network or access any of the servers.

I will post the config and maybe someone could show me what I am missing!

Thanks in advance

1 Accepted Solution

Accepted Solutions

Jennifer Halim
Cisco Employee
Cisco Employee

I would not recommend configuring ip pool in the same subnet as your internal network. Please configure a different ip pool subnet.

However, with the current configuration, you are missing NAT exemption for those subnets:

access-list inside_nat0_outbound extended permit ip 10.255.0.0 255.255.0.0 10.255.11.0 255.255.255.0

Hope that helps.

View solution in original post

2 Replies 2

Jennifer Halim
Cisco Employee
Cisco Employee

I would not recommend configuring ip pool in the same subnet as your internal network. Please configure a different ip pool subnet.

However, with the current configuration, you are missing NAT exemption for those subnets:

access-list inside_nat0_outbound extended permit ip 10.255.0.0 255.255.0.0 10.255.11.0 255.255.255.0

Hope that helps.

Thanks for that, I will configure the different pool now!

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: