Hello,
our company uses a vpn 3030 concentrator with VPN Software Version 4.1.7.A and VPN Client Version 4.0.1. We have some problems with the client configuration when a client connects to our network using VPN. THe client should get two WINS Servers when the client is connected. These two WINS Servers are configured in the gruop on the concentrator. One primary and one secondary wins server. THe problem is that some clients have problems to connect to outlook. When this problem occurs the primary WINS Server is configured as the second WINS Server on the vpn client and the secondary is the primary. The problem is not permanent.It is is from time to time When the same client connects again after a while, the client will get the correct WINS configuration from the concentrator and the outlook connect works very well. I expect that it is a problem with the release version of the concentrator software. Can anybody help?!?
Thanks a lot.
Regards
Christian
