06-18-2002 05:27 AM - edited 02-21-2020 11:48 AM
I have a been having trouble configuring the PIX to VPN Client. Can some one explain to me the basic VPN Setup, Using 6.1(3) software release. I have tried the cisco examples and Still can not get it to work.
Thanks.
06-19-2002 04:04 AM
what client are you using ???
there are some very good sample configs on CCO, here is the link
http://www.cisco.com/warp/public/707/index.shtml#ipsec
scroll down to
IPSec PIX to Cisco Secure VPN Client
IPSec PIX to VPN 3000 Client
Use the sample config as a template and if it still doesn't work, post a query here again with more details.
HTH
R/Yusuf
07-10-2002 07:59 AM
Basic PPTP VPN configuration on the PIX, it will work with nat as well.
ip local pool vpnpool 10.0.1.1-10.0.1.254
sysopt connection permit-pptp
vpdn group 1 accept dialin pptp
vpdn group 1 ppp authentication pap
vpdn group 1 ppp authentication chap
vpdn group 1 ppp authentication mschap
vpdn group 1 ppp encryption mppe 40
vpdn group 1 client configuration address local vpnpool
vpdn group 1 client configuration dns 10.0.1.237
vpdn group 1 client configuration wins 10.0.1.237
vpdn group 1 pptp echo 60
vpdn group 1 client authentication local
vpdn username pptp-Username password pwd
vpdn enable outside
You can also add a Radius server for authentication. This is the minimum config for a PPTP connection VPN.
http://www.cisco.com/warp/public/110/pptppix.html
Hope this helps.
Michael
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide