VPN Client Will Not Connect

[CCNCISCOSVC]

We have an ASA running 8.4(3).

When I try to connect with a VPN client, it does not work.  When I look at the log, port 500 is being forwarded to some device on the network.  There is nothing in the ASA config that references that address (192.168.1.159.)

What are some possible reasons the ASA might send the traffic to that device?

6

Sep 17 2012

14:52:16

302016

74.x.x.x - My IP

30827

192.168.1.159

500

Teardown UDP connection 1902352 for outside:74.x.x.x/30827 to inside:192.168.1.159/500 duration 0:02:15 bytes 3472

[Javier Portuguez]

Hi,

Please attach "show xlate | inc 500" also, ASA version?

Thanks.

Portu.

[Julio Carvajal · Accepted solution]

Hello,

I would say you are hitting the following bug ID: CSCty16661

1st Found-In

8.4(1)

8.4(3)

8.2(5.24

Just to make sure you are hitting the bug, are you using netflow???

Regards,

Julio

Any other question..Sure... Just remember to rate all the helpful posts

[CCNCISCOSVC]

It looks like it was the bug.  Thanks to both of you for the help.