03-26-2011 03:43 PM
Would anybody be able to locate a sample, workign configuration of tacacs+ authentication on the ASA5510?
03-26-2011 04:38 PM
this is the most important part of the config:
aaa-server TAC protocol tacacs+
aaa-server TAC (inside) host 172.16.X.X
key XXXXXXX
tunnel-group VPN_RA type remote-access
tunnel-group VPN_RA general-attributes
authentication-server-group TAC LOCAL
default-group-policy VPN_RA
You should be able to set this complete configuration using the VPN wizard on the ASDM.
03-26-2011 08:21 PM
Hi,
The following link gives the configuration of the tacacs+ authentication on ASA5510 for Vpn clients.
Hope this helps.
Regards,
Anisha
P.S.: please mark this post as answered if you feel your query is resolved. Do rate helpful posts.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide