03-26-2011 03:43 PM
Would anybody be able to locate a sample, workign configuration of tacacs+ authentication on the ASA5510?
03-26-2011 04:38 PM
this is the most important part of the config:
aaa-server TAC protocol tacacs+
aaa-server TAC (inside) host 172.16.X.X
key XXXXXXX
tunnel-group VPN_RA type remote-access
tunnel-group VPN_RA general-attributes
authentication-server-group TAC LOCAL
default-group-policy VPN_RA
You should be able to set this complete configuration using the VPN wizard on the ASDM.
03-26-2011 08:21 PM
Hi,
The following link gives the configuration of the tacacs+ authentication on ASA5510 for Vpn clients.
Hope this helps.
Regards,
Anisha
P.S.: please mark this post as answered if you feel your query is resolved. Do rate helpful posts.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: