VPN Concentrator hangs at "Starting power-up diagnostics..."
I have i believe a silly question or in this case a very easy question, but i can't find the answer. I have a brand new VPN concentrator 3002, the problem i encountered is that when i power up the device it does the following:
Loading image .......... Verifying image checksum ........... Active image loaded and verified... Starting loaded image... Starting power-up diagnostics...
It stays there all the time, i'm not able to do anything, hit return key but nothing happens and if try to conenct to private interface and access 192.168.10.1, also nothing.
The system led is AMBER, and when looking for the problem on the webpage i found "System has crashed and halted. Error."
Now the problem is that i don't know how should i proceed, i mean i have worked with PIX / ASA and usually we just stop the boot and did a network boot and we will be able to access the device with the new image. But with the VPN concentrator i don't know if this is possible, and if so, is there a link where i can find the procedure?
Hi Team, I have one exclusion provided by internal team which is Is it right way to exclude ? *\Program Files\XYZ\* , as per Cisco Docs i see its not recommended because it will create performance issue when we use * at starting , So...
Central Log Management using Cisco Security Analytics and Logging, December 2nd at 8am-9:30am PT
Cisco Security Analytics and Logging is Cisco’s Central Log Management solution for Network Operations and Security Outcomes. It is delivered both as a c...
Cyberattacks are more sophisticated than ever and your online presence has never been more critical to the success of your business. Cisco, through its OEM partnership with Radware, can help secure your digital future by continuously monitoring...