10-25-2005 09:53 AM
hi,
We were using VPN dialer to connect to remote site using internet. But now as PIX has been installed only one user can connect to remote site using VPN dialer. ( This started after fixup protocol esp-ike command was issued) But even after this only one user can access remote location using VPN dialler. Second user gets autheneticated but no data is received from remote location. Can we have more that one users accessing the same remote location over VPN dialer or by VPN client.
10-25-2005 02:51 PM
just wondering if the device you are trying to establish vpn is a pix. if so, apply the command "nat traversal".
10-30-2005 04:03 AM
the end of the tunel is a vpn concentrator. while connecting to end point it still gives error unable to connect , remote host not replying reason 412.
I have tried with isakmp nat-traversal 20 command.
and also fixup protocol esp-ike command. but still proble remains the same.
Pls ack back
Thanx
subodh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide