08-05-2021 01:55 AM
Hi Folks,
Using 4.10.x new version anyconnect hitting a problem where I go to establish to VPN then shortly afterward (5-10 seconds) the VPN fails "The network interface for the VPN connection has gone down."
NAM module is causing the problem (note: when it is disabled no issue) - the NAM starts to try to connect to a wireless/corporate network when we connect to VPN 5-10 seconds in which bombs out the VPN connection (that is where we get the error for network interface has gone down in DART log.) Any ideas of how this could start happening only changed AC version?
J
Solved! Go to Solution.
08-05-2021 05:12 AM - edited 08-05-2021 06:45 AM
The first thing I would check is to make sure the NAM filter driver is NOT bound to the AnyConnect Virtual Adapter. If it is uncheck the box in the image below from the "Cisco AnyConnect Secure Mobility Client" adapter.
If this is the issue you are hitting it is being tracked under https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvw50627/?rfs=iqvred and will be fixed in a future release.
08-05-2021 05:12 AM - edited 08-05-2021 06:45 AM
The first thing I would check is to make sure the NAM filter driver is NOT bound to the AnyConnect Virtual Adapter. If it is uncheck the box in the image below from the "Cisco AnyConnect Secure Mobility Client" adapter.
If this is the issue you are hitting it is being tracked under https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvw50627/?rfs=iqvred and will be fixed in a future release.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide