09-07-2021 01:51 AM
Hello,
A customer have "sysopt connection permit-vpn" enabled on their FTD (6.6.4) and dont want turn it off as it might cause some VPN traffic stops working. I therefore want to add a vpn-filter to a new L2L VPN that we configured. I know where to assign it for RA VPN using a group-policy, but cannot find where to assign it to a Site-To-Site VPN. I thought it would be under the Advanced-Tunnel section, but I can only see the option for sysopt permit-vpn.
Thanks
Chess
Solved! Go to Solution.
09-07-2021 04:29 AM
Hi @Chess Norris,
You'll have to do it using FlexConfig, as this option is not present in FMC GUI (at least on v6.6.5, don't have newer next to me so I can't check).
You can find referent document here.
BR,
Milos
09-07-2021 04:29 AM
Hi @Chess Norris,
You'll have to do it using FlexConfig, as this option is not present in FMC GUI (at least on v6.6.5, don't have newer next to me so I can't check).
You can find referent document here.
BR,
Milos
09-07-2021 04:46 AM
@Milos_Jovanovic thanks. I just checked on my lab FTD running 7.0 and there is no option there either, so FlexConfig seams to be the way to go. I will try it in my lab first.
Best regards
/Chess
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide