cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
369
Views
0
Helpful
1
Replies

VPN lab help between Pix and router

whiteford
Level 1
Level 1

Hi,

I'm trying to create a VPN in my lab setup.

I have a Cisco Pix 515 and a Cisco 2621 router.

I don't have a crossover cable yet, so the outside of the firewall is plugged into a hub and the outside interface FE 0/0 on the router is plugged into the hub too.

The router can ping the outside IP of the Pix.

I must be missing something as I have added the VPN commands to the router and Pix and enabled debugging on the crypto ISAKMP but I see nothing.

The Pix LAN is 192.168.200.0/24

The Router LAN is 10.10.10.0/24

Pix Outside is 213.212.82.5

Router Outside is 213.212.82.6

Using AES-256 SHA, DH Group 5

Hopefully you can see whatthe issue is, I am almost going to eraze both configs and start again.

1 Reply 1

whiteford
Level 1
Level 1

Whoops here are the configs!

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: