02-22-2016 02:33 AM
Dear all,
I have an issue to make sur that my configuration VPN site to site has been done from my side , because i have a problem to make the NAT on my side(ASA5510) .
I think that i do all processus but some problem to make the NAT , can i have help from evry body??
Best Regard
02-23-2016 07:46 AM
Hi,
Can you share the error you
Also share the config of the two ASA's ?
Regards,
Aditya
03-31-2016 03:55 AM
Dear all,
this the message error that i get went i try a ping the the remote site from my side
baosslvpn# sh crypto isakmp sa
Active SA: 1
Rekey SA: 0 (A tunnel will report 1 Active and 1 Rekey SA during rekey)
Total IKE SA: 1
1 IKE Peer: 154.73.61.3
Type : user Role : initiator
Rekey : no State : MM_WAIT_MSG4
baosslvpn#
baosslvpn#
baosslvpn# sh crypto isakmp sa
Active SA: 1
Rekey SA: 0 (A tunnel will report 1 Active and 1 Rekey SA during rekey)
Total IKE SA: 1
1 IKE Peer: 154.73.61.3
Type : user Role : initiator
Rekey : no State : MM_WAIT_MSG2
baosslvpn#
baosslvpn# sh crypto isakmp sa
Active SA: 1
Rekey SA: 0 (A tunnel will report 1 Active and 1 Rekey SA during rekey)
Total IKE SA: 1
1 IKE Peer: 154.73.61.3
Type : L2L Role : initiator
Rekey : no State : MM_ACTIVE
baosslvpn#
as you can see with several sh crypto isakmp some time state is come ACTIVE
some body can help me check what happened exactly with this link site to site ??
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide