I have a vpn connection to a remote site, evidently it turns out that IP is dynamic. So Every 6 months there ip changes. I know we should have a static IP. So the last time this happened I removed the old IP address and put in the new one on the ASA on our end:
no crypto map mymap 1 set peer 72.95.xx.xx
crypto map mymap 1 set peer 72.65.xx.xx
The technician who previousely worked on this, and is in the woods hunting, said that he also
re-applied the myset crypto map on outside interface.
Does anyone know what I need to do to to re-apply the myset crypto map on the outside interface??
No, you don't need to reapply the crypto map on the outside interface.
Just have to clear the ipsec tunnel on both end in case one side is still active and the other side has been cleared.
However, re-applying the crypto map on the outside interface will also reset the tunnel. If you only have 1 tunnel, then it's ok to re-apply the crypto map. However if you have multiple tunnels, that would also clear the other tunnels.
IntroductionComponentsIBM MaaS360 ConfigurationISE ConfigurationOnboard and validating access from Windows ClientEnrolling Windows 10 against IBM MaaS 360
Cisco Identity Services Engine (ISE) gives you intelligent Integrated protectio...
This video provides the steps to configure the Cisco Threat Response (CTR) and ESA Integration.
This is live on the portal:https://video.cisco.com/video/6159336218001
And on YouTube:https://www.youtube.com/watch?v=UCKIdx5rdFg
I need to migrate from C170 to C190 and have already match to the same Firmware Version. I have a question. Is there any method that can export and import the configuration file instead of form cluster ?
This AMA will serve as the Q&A for the Cisco Live Digital breakout DGTL-BRKSEC-1011 - "A Challenger Appears: Defending Mailboxes in the Cloud" which covers a brand new product which will be announced during the event: Cloud Mailbox Defense.
I've fixed this before but now I'm running into a different type of an issue. My firewall isn't booting to the image so I have to keep reloading the image onto the ASA. Any help would be appreciated. Also my Config-Register is set to 0x1. As of right now,...