What is the cost effectiv VPN/VoIP product which can connect to 2620 ?

[squaredeal]

We have a 2620 router at the head office with VPN and VoIP module. We would like to connect from our branch office and we would like to have VPN and VoIP implemented? Can any of you recommend what is the best cost effective product for this ?

Initially we thought of going for PIX 501 for VPN alone. That case what should be the VoIP product ?

Or we should go for a VoIP/VPN product in the same box? This case will there be any performacne problem ?

Thanks in advance

Thomas

[ciscomoderator]

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online http://www.cisco.com/go/solutions. You may also contact our product information line at 1-800-553-NETS or a Cisco Systems Engineer at your local Cisco office or reseller. To locate your local Cisco representative, visit http://www.cisco.com/warp/public/687/Directory.shtml

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.

[travis-dennis_2]

Not sure of the specs but check into using the ATA186 to come into your router/VPN and then into your PBX. E-mail me if you have any questions. I am right in the middle of doing this myself but on a 3640. tdennis@catalysttech.com