Wireshark and Anyconnect

[ohforce55]

I'm using Windows 10 and recently tried capture packets but there was no any capture interface came up after installing Wireshark.

I noticed that I had to use Win10Pcap intead of WinpCap 4 something and I finally could see the capture interfaces.

But when I connected to the Cisco VPN (Anyconnect), I still can't see the capture interface for the anyconnect...

Please advise me..

Thank you!

[GioGonza]

Hello @ohforce55,

For newer versions of wireshark it doesn´t work when you try to verify the interfaces to capture traffic, you need to open the Wireshark Legacy that should be also installed and with this one, you are going to be able to see the interface and check the capture for AC.

Have a good one!

Gio

[ohforce55]

Thank you for your reply!

I will check!

[Mohammad Alhyari]

This should work:

https://www.microsoft.com/en-us/download/details.aspx?id=4865

HTH

Moh,

[ohforce55]

Thank you!

I will try to install it.