Cisco Unified Attendant Console Advanced is an application for the Unified Communication Solutions which simplifies the ability of an operator to make/receive calls in a busy business environment with large call volume. It also simplifies various call functioning such as conference/transfer/call park. Operator has control over the client application and has access to the entire directory which simplfies searching and transferring calls to users. Cisco Unified Attendant Console Advanced is widely deployed with the Cisco Unified Call Manager. This session will provide an opportunity to learn and ask questions about the Cisco Unified Attendant console Advanced and it's position in the Unified Communication solutions.
Ask questions from Monday, August 24th to Friday, September 4th, 2015
EXPERT NAME HERE is a Customer Support Engineer in Cisco TAC based out in Bangalore, India. She has total 2 years of experience and her area of expertise covers Cisco Unified Communications Manager, Cisco Unified Attendant Console and Cisco Unity Connection. She has delivered multiple training sessions on understanding the architecture and functioning of the Attendant console (CUAC). She graduated with a Bachelor of Electronics and Communication Engineering from Manipal Institute of Technology, Manipal University. She has achieved certifications for CCNA, CCNP - R&S and is pursuing RHC.
EXPERT NAME HERE is a Customer Support Engineer in Cisco TAC based out in Bangalore, India. He has been working with TAC from past 4 years and 10 months in multiple domains - CUCM, Unity, Attendant Console. Alok has delivered trainings on CUCM, SIP and CUAC and Attendant Console. He worked closely with the development team identifying bugs in the testing phase and working towards resolutions for enhancing the quality of products. Alok holds a Bachelor's degree in Information Technology College – D.A.V. College of Engineering and Technology from Maharishi Dayanand University, Rohtak. He also holds CCIE Collaboration and RHCE Certifications(CCIE Collab # 45575).
I have a router-on-a-stick that is connected to a switch to 3 workstations that are one connected to VLAN 2 & VLAN 3. 2 workstations are connected to VLAN2 while the other one is connected to VLAN3. Now the problem is that i need to deny network traff...
Hello,I am trying to configure ZBFW in the MID router, using the following topology: The main objective is allowing the following protocols to pass from the TEST zone to NODO_SUC zone, with the condition that the communication must start in the TEST ...
I just bought cisco access point from amazon and tried to put it on console cable and use the terminal but the terminal doesn't show me anything except some questions marks. Is the IOS have problem ? and how to fix it ?