The link below has a sizing guide that talks about configuring multiple reporting servers and load balancing servers but the documentation has no information on how to configure multiple servers with specific roles (indexer, forwarder, etc).
Is there any documentation on how to design and install the AWSR with multiple servers?
If the estimated requirements for indexed data volume exceed 100 K/Users (estimate: 100 GB/day,) the server infrastructure should be adjusted.
• By adding another Advanced Web Security Reporting instance and adjusting the configuration, the new infrastructure would offer an increase in aggregate indexing and search performance (once the data is load-balanced), and an increase in storage and retention capacity.
• A dedicated forwarder server would also be added to the infrastructure and configured to monitor the WSA log files and forward the log data across multiple indexers using load balancing.
• To facilitate the implementation and configuration of an environment that exceeds 100K users, it is recommended that you engage Professional Services.
Threat Response Basics
What is Threat Response and how can it help my organization?
What is the cost of Threat Response?
What are the deployment options for Threat Response?
Is Threat Response available outside of the United States?
Gartner has once again named Cisco a Leader in the Magic Quadrant for Network Firewalls. This distinction recognizes Cisco's ingenuity in redefining the firewall as the basis for an integrated security platform.
Find out how Cisco stands out from the comp...
Hi experts,I would like any suggestions on this topology. We are is the middle of replacing our old ASA5520 with the new FirePower. Our current firewall terminate our IPsec tunnels and the GRE is terminated on the first inside router's loopback on the sec...
Hi All, A customer wants to authenticate Anyconnect VPN users from an ASA using the client installed certificate and then with AD. i.e. Is this a corporate device?Would we recommend authenticating the cert on the ASA then passing the AD check to ISE ...
Hello Team, we are getting alert in FMC stating policy deployment failed, we are running on 6.2.0 version and not sure which version is stable version to re mediate this issue, in one event i have seen restart will resolve this issue but is it perman...