cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
543
Views
0
Helpful
2
Replies

Unable to boot cisco SMA -M695F Appliance

ashish.saxena1
Level 1
Level 1

Hello Experts ,

We are unable to boot CISCO SMA -M695F Appliance.

It is not prompting  for password , when we give username admin it is throwing error"AsyncOS Amnesiac (cuau0)"

 

 


/boot/loader.conf.local.gz/boot/loader.conf.local/boot/nextboot.conf.gz/boot/nextboot.conf/boot/kernel/linker.hints.gz/boot/kernel/linker.hints/boot/kernel/kernel.ko.gz/boot/kernel/kernel.ko/boot/kernel/kernel text=0x6f6270 data=0x89b40+0x235cc0 syms=[0x8+0xbc8b0+0x8+0xb7738]
Error: stack underflow
/boot/boot.conf.gz/boot/boot.conf
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
UFS booting check passed
Signature matched booting ...
Start @ 0xffffffff80283540 ...
EFI framebuffer information:
addr, size 0x9b000000, 0x300000
dimensions 1024 x 768
stride 1024
masks 0x00ff0000, 0x0000ff00, 0x000000ff, 0xff000000
login: admin
AsyncOS Amnesiac (cuau0)

Please guide me how can i troubleshoot this issue

2 Replies 2

Milos_Jovanovic
VIP Alumni
VIP Alumni

Hi @ashish.saxena1,

Given that you are unable to login, a fact that most of troubleshooting is actually requiring you to be logged in to try to do factory defaults, and a fact that you can't download AsyncOS for clean-install, I would advise to open a TAC case, to get proper assistance.

Kind regards,

Milos

Chandan Singh
Level 1
Level 1

Thanks for the response , i will go ahead and open the TAC