WSA S695 / S195 Web Security Appliance: NWS: failoverHealthy/Unhealthy

[Densha Otoko]

Hi All

To monitor "failoverHealth/Unhealth" on WSA S695, we are considering obtaining the values through SNMP polling.

Anyone know the OID required for retrieving these values via SNMP polling?

Additionally, we also want to perform similar monitoring on the WSA S195 Web Security Appliance. If the OIDs differ, anyone can share the respective OIDs for this device as well.

Thank you

[amojarra · Accepted solution]

Hello @Densha Otoko 

there are 2 OIDs for Failover 

.1.3.6.1.4.15497.1.1.2.15 Failover Un healthy	.1.3.6.1.4.15497.1.1.2.16 Failover healthy

The OIDs are not different in the model and versions

Regards,

Amirhossein Mojarrad

+++++++++++++++++++++++++++++++++++++++++++++++++++

++++     If you find this answer helpful, please rate it as such    ++++

+++++++++++++++++++++++++++++++++++++++++++++++++++

[Densha Otoko]

Hi Amirhossein

Thank you so much for the reply.

Really appreciate it.

[Densha Otoko]

Hi Amirhossein

Sorry to ask you again

For my further self study, appreciate if you can share any documentation that showing the OID value if available such as URL or any reference files

Thank you again

[Ken Stieers]

Basic SNMP info is here:
https://www.cisco.com/c/en/us/td/docs/security/wsa/wsa-15-0/user-guide/wsa-userguide-15-0/b_WSA_UserGuide_11_7_chapter_010110.html#con_1490042

That includes description of and a link to the MIBs which are here: https://www.cisco.com/c/en/us/support/security/web-security-appliance/series.html

The MIBs degine and document the full set of OIDs for the WSA.

[Densha Otoko]

Thank you Ken

Really appreciate it

[amojarra]

Hi @Densha Otoko 

It is OK, please do not hesitate to ask any questions,

As Ken mentioned, you can download all 3 MIBs from : https://www.cisco.com/c/en/us/support/security/web-security-appliance/series.html

then you can install any MIB Browser on your PC, Import those files and review all the OIDs.

I use : https://www.ireasoning.com/mibbrowser.shtml

Regards,

Amirhossein Mojarrad

+++++++++++++++++++++++++++++++++++++++++++++++++++

++++     If you find this answer helpful, please rate it as such    ++++

+++++++++++++++++++++++++++++++++++++++++++++++++++

[Densha Otoko]

Thank you Amirhossein

Really appreciate it 

[Densha Otoko]

Hi @amojarra @Ken Stieers 

I tried as per your instructions and it works !

However I would like confirm these OID is for SNMP polling or SMNP trap

failoverHealthy OID : .1.3.6.1.4.15497.1.1.2.16

failoverUnhealthy OID : .1.3.6.1.4.15497.1.1.2.15

Thank you