04-04-2016 08:33 AM - edited 03-08-2019 07:40 PM
Dear All,
Can WSA tunnel custom ports with PBR setup?
I am not able to have it working in my lab, even though HTTPS decryption is enabled and the port is set in HTTP connect, also tunneling of non-HTTP requests on HTTP ports is enabled.
a packet capture on WSA shows TCP retransmission.
04-05-2016 01:30 PM
Bechara.abouraha,
I recommend you check out this data sheet with information about Cisco's WSA
Cisco Web Security Appliance Data Sheet - Cisco
In addition, you can also post this to the Cisco Support Community for additional feedback and information from Cisco technical experts.
https://supportforums.cisco.com/
I hope this helps. Thank you for participating in the community.
Kelli Glass
Moderator for Cisco Customer Communities
06-02-2017 04:40 AM
I cannot see your packet capture, I would recommend you check out this data sheet with information about Cisco's WSA
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide