cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
252
Views
10
Helpful
2
Replies

Who ended the meeting

Joabarca
Beginner
Beginner

Hello!

I received a complaint from my users saying that their Webex crushed. They are looking into Webex or network issues. However, when I look into the Webex meeting on troubleshooting I just see a normal disconnection:

exitMeeting.PNG

Is there a way to see who or how a meeting or webinar ended? (i.e. Leave button from the touch panel, a laptop, directly from the VC, etc.)

 

Thank you!

1 Accepted Solution

Stephanie Knoop
VIP Collaborator VIP Collaborator
VIP Collaborator

Sounds like you are asking about a room system.

If you log into the web UI for the video unit (assuming Cisco) and go to diagnostics, you can find some of this information in the call logs and eventlog/all logs.

Start in the call logs to determine if it was a local or remote disconnect:

[cid:image001.png@01D8ACD8.40B11490]

You can also look in the eventlog/all

Local Disconnect (Touch Panel):
2022-08-10T15:58:21.847-07:00 appl[3236]: CuilApp[1]: User root/internal/phoenix-system about to execute command '/Call/Disconnect' from localhost.
2022-08-10T15:58:21.847-07:00 appl[3236]: MainEvents I: CallDisconnectRequested(p=3) remoteURI='' cause=[normal('') 'LocalDisconnect']

2022-08-10T15:58:22.032-07:00 appl[3236]: MainEvents I: CallDisconnected(p=3) remoteURI='' causeToLocal=[normal('') 'LocalDisconnect'] causeToRemote=[normal('') 'LocalDisconnect']

Local Disconnect (Web UI of codec)

2022-08-10T16:19:47.327-07:00 appl[3236]: CuilApp[1]: User /internal/xows about to execute command '/Call/Disconnect' from 10.XXX.242.231.

2022-08-10T16:19:47.328-07:00 appl[3236]: MainEvents I: CallDisconnectRequested(p=5) remoteURI='' cause=[normal('') 'LocalDisconnect']

2022-08-10T16:19:47.598-07:00 appl[3236]: MainEvents I: CallDisconnected(p=5) remoteURI='' causeToLocal=[normal('') 'LocalDisconnect'] causeToRemote=[normal('') 'LocalDisconnect']

Remote Disconnect (ended by Webex host)

2022-08-10T16:04:50.621-07:00 appl[3236]: Wx2Call[3]: wx2_call::onMeetingEndedTimeout(p=4): disconnecting call

2022-08-10T16:04:50.621-07:00 appl[3236]: Wx2Call[3]: wx2_call::doDisconnect(p=4): cause=RemoteDisconnect desc=MeetingEnded

2022-08-10T16:04:50.621-07:00 appl[3236]: Wx2[3]: CallImpl::leave

2022-08-10T16:04:50.622-07:00 appl[3236]: MainEvents I: CallDisconnectIndicated(p=4) remoteURI='' cause=[disconnected('MeetingEnded') 'RemoteDisconnect']

2022-08-10T16:04:50.710-07:00 appl[3236]: MainEvents I: CallDisconnected(p=4) remoteURI='' causeToLocal=[disconnected('MeetingEnded') 'RemoteDisconnect'] causeToRemote=[normal('') 'LocalDisconnect']


Response Signature

View solution in original post

2 Replies 2

Stephanie Knoop
VIP Collaborator VIP Collaborator
VIP Collaborator

Sounds like you are asking about a room system.

If you log into the web UI for the video unit (assuming Cisco) and go to diagnostics, you can find some of this information in the call logs and eventlog/all logs.

Start in the call logs to determine if it was a local or remote disconnect:

[cid:image001.png@01D8ACD8.40B11490]

You can also look in the eventlog/all

Local Disconnect (Touch Panel):
2022-08-10T15:58:21.847-07:00 appl[3236]: CuilApp[1]: User root/internal/phoenix-system about to execute command '/Call/Disconnect' from localhost.
2022-08-10T15:58:21.847-07:00 appl[3236]: MainEvents I: CallDisconnectRequested(p=3) remoteURI='' cause=[normal('') 'LocalDisconnect']

2022-08-10T15:58:22.032-07:00 appl[3236]: MainEvents I: CallDisconnected(p=3) remoteURI='' causeToLocal=[normal('') 'LocalDisconnect'] causeToRemote=[normal('') 'LocalDisconnect']

Local Disconnect (Web UI of codec)

2022-08-10T16:19:47.327-07:00 appl[3236]: CuilApp[1]: User /internal/xows about to execute command '/Call/Disconnect' from 10.XXX.242.231.

2022-08-10T16:19:47.328-07:00 appl[3236]: MainEvents I: CallDisconnectRequested(p=5) remoteURI='' cause=[normal('') 'LocalDisconnect']

2022-08-10T16:19:47.598-07:00 appl[3236]: MainEvents I: CallDisconnected(p=5) remoteURI='' causeToLocal=[normal('') 'LocalDisconnect'] causeToRemote=[normal('') 'LocalDisconnect']

Remote Disconnect (ended by Webex host)

2022-08-10T16:04:50.621-07:00 appl[3236]: Wx2Call[3]: wx2_call::onMeetingEndedTimeout(p=4): disconnecting call

2022-08-10T16:04:50.621-07:00 appl[3236]: Wx2Call[3]: wx2_call::doDisconnect(p=4): cause=RemoteDisconnect desc=MeetingEnded

2022-08-10T16:04:50.621-07:00 appl[3236]: Wx2[3]: CallImpl::leave

2022-08-10T16:04:50.622-07:00 appl[3236]: MainEvents I: CallDisconnectIndicated(p=4) remoteURI='' cause=[disconnected('MeetingEnded') 'RemoteDisconnect']

2022-08-10T16:04:50.710-07:00 appl[3236]: MainEvents I: CallDisconnected(p=4) remoteURI='' causeToLocal=[disconnected('MeetingEnded') 'RemoteDisconnect'] causeToRemote=[normal('') 'LocalDisconnect']


Response Signature
Getting Started

Welcome to the Webex Community. This is your home to ask questions, share knowledge, and attend live webinars.

Recognize Your Peers