10-08-2021 01:11 PM
Has anyone been able to configure webex calling using a Cisco 1100 ISR as a Local Gateway? specifically ISR 1121
Regards!
07-03-2023 03:59 AM
Wich licenses do we need to order for isr 1100 act as webex local gateway ?
10-13-2021 09:19 PM
What trouble are you facing ?
When using Cisco 1100 make sure you are on IOS-XE 16.12.2 or later.
10-12-2021 09:54 PM
I do not have ISR 1100 Series CUBE router but I have been using ISR 4351 as local gateway in my lab environment and it is working fine. Below is my setup:
Verizon Network <--SIP Trunk--> Cisco 29XX <--SIP Trunk--> CUCM <--SIP Trunk--> Cisco 4351 <--SIP Trunk--> Webex Calling
I have followed below resources to configure Local Gateway and CUCM:
2. YouTube video
https://www.youtube.com/watch?v=vYu1bEz_4Jk
3. Configure Unified CM for Webex Calling
https://help.webex.com/en-US/article/nqqzbk7/Configure-Unified-CM-for-Webex-Calling-
I hope this is helpful.
10-11-2021 01:02 AM
I've been using a vCUBE up to now and it was working fine..
At wich point are you struggling?
Welcome to the Webex Community. This is your home to ask questions, share knowledge, and attend live webinars.