cisco codec pro accessories compatibility.

[Geeth]

Hi,

The customer has SX80 CODEC with below accessories,

PRODUCT NUMBER	PRODUCT DESCRIPTION
CTS-CAM-P60+	Cisco TelePresence Precision 60 Camera - auto expand only
CTS-CTRL-DVX-10+	^Touch 10 auto expand
CTS-ST-ARRAY60+	Speaker Track 60 Microphone Array
CTS-MIC-TABL60	Cisco TelePresence Table Microphone 60
CTS-CAM-P60+	Cisco TelePresence Precision 60 Camera - auto expand only
CTS-MIC-TABL60	Cisco TelePresence Table Microphone 60
CP-MIC-WIRED-S=V01
CP-MIC-WIRED-S=V01

The customer needs to replace the current SX80 codec to CODEC PRO.

I need to know, Are the above accessories completely compatible with CISCO CODEC PRO?

Please help me to clarify this.

[Wayne DeNardi · Accepted solution]

Most of those additional components are also end of sale devices, or will reach their end of support date during the life of the codec pro you are replacing the SX80 with.  

Precision 60 Camera - End of Sale 7 July 2024.  End of Support 31 July 2029.
SpeakerTrack60 - End of Sale 3 April 2024.  End of Support 30 April 2029.
Touch 10 - End of Sale 26 February 2021.  End of Support 28 February 2026.
Table 60 Microphone - End of Sale 11 December 2019.  End of Support 31 December 2024.

Ideally you would replace everything with new models to ensure that you have the best compatibility moving forward.

[Geeth]

Hi Wayne,

Mentioned devices are end of sale. It is true. My question is "these devices are compatible with codec pro".

Appreciate your support.

Thanks