cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1217
Views
0
Helpful
1
Replies

Webex Board Companion Mode in Teams CVI

josephhayman
Level 1
Level 1

Hi, 

 

Looking for some advice.

 

We've recently started to roll out the Teams CVI across many of our Webex devices. We have a few rooms setup, where we have a Webex Board in companion mode to the main room kit. On a very quick test, when dialled into the CVI the Board does not seem to realise it's in a call and we are unable to share the board into the call. I had my doubts this was work, due to the board and room kit being paired over the cloud, but would just like to know if 1. This is a known thing?  and 2. Is this on a roadmap to fix, if it is a known limitation?

 

Any help would be greatly appreciated. 

 

Many thanks 

1 Accepted Solution

Mayham
Level 1
Level 1

CVI is not supported with companion mode. This was confirmed by Cisco TAC and by my Cisco Colab TECHNICAL SOLUTIONS ARCHITECT.

View solution in original post

1 Reply 1

Mayham
Level 1
Level 1

CVI is not supported with companion mode. This was confirmed by Cisco TAC and by my Cisco Colab TECHNICAL SOLUTIONS ARCHITECT.

Getting Started

Welcome to the Webex Community. This is your home to ask questions, share knowledge, and attend live webinars.