1242 - Can I display IP address through console

[MikeAtEHI]

I have a 1242 AP, it gets its IP address from a DHCP server.

Is it possible to get the  IP address of 1242 the through the console interface?

Mike

[Roman Rodichev]

you want to know the IP your 1242 got from the DHCP server? Console in and do "show ip int brief"

[MikeAtEHI]

I get :

Interface                 IP-Address      OK? Method  Status                Protocol
BVI1                       unassigned      YES DHCP     up                    up
Dot11Radio0        unassigned      YES NVRAM  up                    up
Dot11Radio1        unassigned      YES NVRAM  administratively down down
FastEthernet0       unassigned      YES NVRAM  up                    up

Looks like IP unassigned, that's not what DHCP server says, it has mac address IP and lease

I have digging to do.

[Roman Rodichev]

Do "show int BVI1", verify mac address matches the lease. Maybe someone else got it. Check first 3 bytes of the mac on the coffer.com to see the vendor of the mac

[MikeAtEHI]

IOS reported mac address matches dhcp and AP sticker.

Thanks for the help Roman, I must run home now.