I have two 1252s on ports 1 and 2 off a Catalyst 3550. No other device on the switch except the fiber uplink.
Initially 1252 #2 (on port 2) resets for no reason at no specific time.
We did not have a problem with 1252 #1.
The show ver on #2 does indicate that equipment resets due to power. I figured the 3550 is having problems powering two 1252s so had this AP on PWRINJ4 (validated its not drawing power via show power inline).
Today, #2 does not reset. However, now #1, which is the only device using inline power is now resetting. Same thing, reset due to power. Same weird behavior, at no particular time.
I've also have "no cdp enable" out off each port as i understand CDP sometime cause device to not boot up (15w versus 15.4w issue).
Dear Friends, I have to upgrade IOS in 5520, here my question was how to identify which FUS was installed in the WLC.GUI ----Software Version 126.96.36.199Emergency Image Version 188.8.131.52 -------sh sysinfo Product Version....................
Security has become one of the greatest concerns for every company alike. The industry is moving towards a fast paced and customer-oriented network infrastructure which automatically increases the vulnerabilities a network is exposed to. As the industry t...
We got some new Apple Macbook Air, when connected to wifi, we found the link speed was only 54Mbits, but other laptops like DELL or Panasonic were working fine, the link speed was at least 800 Mbits. we are using Cisco WLC 5504 and 2702I ap.and the funny ...
In today’s world where business needs to be up and available 24X7, one of the major challenges faced by a lot of companies is the seamless uptime of their network infrastructure. Any company’s primary focus is always on keeping its infrastructure ready fo...