cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Community Helping Community

373
Views
0
Helpful
3
Replies
Highlighted
Beginner

1262 lwapp with 12dbi antenna

                   Hello all,

I have a question about the 1262 when joined to a controller.  Is there a way to increase the antenna gain on the raidios for increased distance? I have a 12dbi hooked up but i noticed in a show run that the output shows "antenna gain 0" for both radios.

Thanks,

joe

Everyone's tags (5)
3 REPLIES 3

Re: 1262 lwapp with 12dbi antenna

With any I the external antenna AP you have to go and set the dBi of the antenna.

Keep in min that when you set T&E gain t will affect RRM. The WLC won't let you violate EIRP.

Steve

Sent from Cisco Technical Support iPhone App

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
Beginner

Re: 1262 lwapp with 12dbi antenna

I'm not sure i understand your response. Can you rephrase that for me please

Thanks,

Joe

Sent from Cisco Technical Support iPhone App

Hall of Fame Master

1262 lwapp with 12dbi antenna

Steve is saying that you have to configure the gain when using the external antenna, but the WLC will adjust depending on the reglatory domain the ap is set for, so you don't violate any FCC or reglatory domain rules.  This will also affect your RRM.

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

-Scott
*** Please rate helpful posts ***
CreatePlease to create content
Content for Community-Ad

August's Community Spotlight Awards