Hi,
Im wondering about my 2 WLC526's.
One is 2 port, while my 2nd one has 12ports.
But one has only the 2port cut out, and the other one neatly has the 12.
the 12ports has a faulty CF card, (installed with ubuntu something)
if i swap the CF of the 2ports into the 12ports, it boots fine, but in the gui i only see the 2port image.
I have also tried to image the CF, but the clone seems not to boot.
(judging from the amber led going on)
Don't forget to rate helpful posts.
